Universal Hovercraft UH-13T Image and video hosting by TinyPic

[back to 3-6 person]

The UH-13T is a high speed cruiser capable of speeds in excess of 70 mph. The lightweight rectangular design combination with a 2-stroke thrust engine allows the 13T to accelerate like sports car over any terrain. It maneuvers very well at high speed and at low speed in tight conditions.

It's powered by two engines. The lift fan is powered by a vertical shaft 8 to 15 horsepower lawn tractor engine. Briggs & Stratton, Tecumseh, Honda, Kohler or Robin engines work well. The thrust propeller is powered by a 2-stroke snowmobile type engine. Rotax, Yamaha, Polaris and Hirth engines work well. Some builders choose to power the craft with four stroke engines such as the Briggs & Stratton 35, EA-81 Subaru, HKS or modern 4-stroke engines removed from snowmobiles.

Construction is from wooden ribs and stringers covered in plywood. This construction technique is lightweight and allows the builder to install storage compartments in the hull between the ribs. The craft can be built with or without a thrust duct.

Click here to view the UH-13T in our Builders Showcase

Capacity 2 to 3 Passengers
Payload 700-850 Lbs
Speed 45 to 70 mph
Hover Height 8 inches
Length 13 ft 8 in
Width 6 ft 5 in
Empty Weight 400 to 550 Lbs
Flotation 1400 Lbs
Climb Gradient 14 to 45%
Engines 8 to 15 hp lift (under 80 lbs), 20 to 90 hp 2-cycle thrust
Construction Method Wood Ribs and stringers with Plywood Skin
Construction Time 150 to 400 hours
Thrust Duct Diameter 48 inches
Lift Duct Diameter 30 inches

Available UH-13T Products

Product Image Model- Item Name Price
UH-13T Plans 6014PP

UH-13T Plans



UH-13T Wooden Rib Set 13TRIB

UH-13T Wooden Rib Set



UH-13T Rib Set and Plywood 13TRIBWOOD

UH-13T Rib Set and Plywood



Copyright © 2018 Universal Hovercraft of America, Inc. Unauthorized use of any content on this site is prohibited.